Three-way tipper trailerMEILLER
MZDA 18.23, linke SW abklappbar, Rollplane
Three-way tipper trailer
MEILLER
MZDA 18.23, linke SW abklappbar, Rollplane
Fiksna cena plus PDV
37.950 €
(45.160 € bruto)
Godina proizvodnje
2026
Stanje
Novo
Lokacija
Egestorf 

Osnovni podaci
Cena i lokacija
Fiksna cena plus PDV
37.950 €
(45.160 € bruto)
- Lokacija prodavca:
- Eichenstich 12, 21272 Egestorf, Nemačka

Pozvati
Tehnički detalji
Dimenzije i težina
Ukupna težina:
18.000 kg
Maksimalna nosivost:
13.200 kg
Dužina tovarnog prostora:
4.900 mm
Širina utovarnog prostora:
2.380 mm
Visina tovarnog prostora:
900 mm
Osovine i točkovi
Konfiguracija osovina:
2 osovine
Detalji ponude
- ID oglasa:
- A221-45-767
- Referentni broj:
- 6294
- Ažuriranje:
- последњи пут дана 24.07.2026
Opis
Brakes:
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums
----Axles:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Drawbar / Flange coupling:
* Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle)
----Electrical system / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pole electrical connector
* 5-chamber tail lights with protective cover
----General components:
* Aluminum air reservoir
* Welded box-type drawbar
* Support jack at the front
* Underrun protection at the rear
* Closed plastic individual fenders
* Access ladder on the front left side, on the front panel
----Tipping body:
* Steel 3-sided tipping body with M-Jet sideboards
* Front panel made of 3 mm STEELECT 240 steel
* Side walls with sturdy, continuous top rail inclined inwards
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls – without center rail
* Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall
Bwedpfezd I Diox Aihjw
* Left side wall pivots via manual central locking and can be folded down with sideboard spring lift
* 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate
* Manual metering device via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roller cover:
* Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel
----Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of the sideboards in RAL 9006 white aluminum
----Information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approximately week 37/2026
Oglas je automatski preveden. Moguće su greške u prevodu.
* Wabco TEBS-E / ABS (electronic braking system with RSS)
* Emergency release device for spring brake cylinders
* Drum brakes 420 x 180 mm with asbestos-free brake linings and closed brake drums
----Axles:
* 2 x 9 ton BPW or SAF axles
----Suspension:
* Air suspension, automatic rapid lowering during the tipping process to increase stability (can be disabled for asphalt pavers)
----Drawbar / Flange coupling:
* Curved central drawbar with height-adjustable 50 mm flange coupling (tipping via the drawbar is possible, but with a limited tipping angle and dependent on the towing vehicle)
----Electrical system / Lighting:
* Tire pressure monitoring system (TPMS)
* 15-pole electrical connector
* 5-chamber tail lights with protective cover
----General components:
* Aluminum air reservoir
* Welded box-type drawbar
* Support jack at the front
* Underrun protection at the rear
* Closed plastic individual fenders
* Access ladder on the front left side, on the front panel
----Tipping body:
* Steel 3-sided tipping body with M-Jet sideboards
* Front panel made of 3 mm STEELECT 240 steel
* Side walls with sturdy, continuous top rail inclined inwards
* Side walls and rear gate made of 4 mm STEELECT steel (HBW 400)
* Continuous side walls – without center rail
* Right side wall pivots via manual central locking – preparation for long lever and hinges for folding side wall
Bwedpfezd I Diox Aihjw
* Left side wall pivots via manual central locking and can be folded down with sideboard spring lift
* 4 mm rear gate pivots with automatic cam lock and 150 mm rear tailgate
* Manual metering device via chain
* 5 mm bridge floor made of STEELECT steel (HBW 450 steel)
----Roller cover:
* Roller cover (RAL 9006) with crank handle at the rear and guide rail on the front panel
----Painting:
* Chassis painted in RAL 7021 black-gray
* Painting of the sideboards in RAL 9006 white aluminum
----Information:
* Vehicle body complies with EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
----Delivery time:
* Available from approximately week 37/2026
Oglas je automatski preveden. Moguće su greške u prevodu.
Dobavljač
Napomena: Besplatno se registrujte ili prijavite, da biste pristupili svim informacijama.
Registrovan od: 2001
165 Oglasi online
Pošalji upit
Telefon & Faks
+49 40 33... oglasi
Vaš oglas je uspešno izbrisan
Došlo je do greške.


































