Forage vagon

2-A SCHWARZMÜLLER ErdmuldeTP22 PROFI-EDITION NEU

NEW VEHICLES IN STOCK FROM 01/2023!!

WhatsApp:

We have the largest SCHWARZMÜLLER TP22 EARTH TROUGH selection in southern Germany in stock for you!!

ALL EARTH TROUGHS IN STOCK AVAILABLE IMMEDIATELY!!!

SCHWARZMÜLLER 2-AXLE CENTRAL AXLE HEAVY-DUTY SEGMENT DUMP TIPPING TRAILER - OFFROAD, type TP 22 PROFESSIONAL EDITION

Transport goods
Gravel, excavated earth, etc. in construction site use
Tug/towing vehicle data:
Tow force requirement at least 125KW/170 HP, dead weight at least 6.5t
Support load at least 4 t
Trailer coupling K80 ball insert, bearing block with bottom attachment
Hydraulic supply for 2-pipe tipping hydraulics and hydraulic supply with
at least 3 double-acting control units for drawbar, support foot, rear wall, etc.
(Oil volume approx. 40l required)
Weights
Total weight (permissible) 22 t
Total weight (technical) 28 t in off-road use with support load 4 t
Dimensions
Inner length approx. 5,300 mm
Inner width approx. 2,330 mm
Inner loading space height approx. 1,200 mm
Loading volume approx. 13.5 m³
Overall width max. 2,550 mm
Loading height unloaded approx. 2,500 mm
Frame
Central axle steel frame welded construction in weight-optimized design
Lightweight frame made of high-strength fine-grain steel, for wide tires, total width max. 2,550 mm
Towing device
Heavy-duty V-drawbar in welded lattice construction
Hydraulically height-adjustable approx. 500 mm and dampened with heavy-duty ball head coupling K80
WITH TIRE PROTECTION!!
Support device
1 mechanical support leg, can be uncoupled when empty, galvanized
Axles
BPW pendulum unit with drum brakes, S-cam brake 410/180 mm, load capacity 24 t, off-road version
Axle spacing 1,550 mm
1st and 2nd axle rigid
Wheels
4 tires 650/55 R 26.5, 169D, made by NOKIAN CT
Load capacity 15.8 t / axle, maximum speed of 40 km/h
4 steel rims 20.00 x 26.5, offset 30 mm, silver
Braking system/suspension
Two-line compressed air braking system
Braking system made by Wabco
Hydraulic ALB controller
Without ABS - for tractor operation up to 40 km/h
Spring-loaded parking brake on 2nd Axle
Steel air tank 80 l
Brake/air connection lines with 2 individual coupling heads yellow/red
Hose lines laid over hose tower
Tipping trough
Steel trough with reinforced floor plate made of Hardox (HB450) and reinforced upper belt
UPPER GIRTH COMPLETELY WELDED FULLY
Floor thickness 6 mm = continuous floor plate, wall thickness 6 mm
Front wall and rear wall slanted,
continuous steel protective plate (apron) on both sides in the wheel area
Raised excavator protection
Special steel rear wall for extra-high opening with recessed bearing,
double-acting hydraulic cylinder with load holding valve, hydraulic actuation via towing vehicle
not suitable for violent compaction of material,
Goljif I Rxehcdw Debl
with additional joint, fixed locking hooks on the side
Hydraulics
1-pipe system with hydraulic connection hose including plug-in coupling SVK DN13
Incl. quick lowering for tipping hydraulics through 2-hose system
1 front tipping press, reverse tipping, tipping angle approx. 55 °
Lighting/electrics
12/24-volt lighting system
2 full LED five-chamber tail lights "EcoLED II" with ballast
on separate light carrier
Protective grille cover over tail lights (supplied loose, not permitted in the area of StVO))
Note: May not be used on public roads!
2 LED clearance lights at the rear
LED side marker

Reklama je automatski prevedena i došlo je do nekih grešaka prilikom prevoda.